20000mAh 130W 1C1A Power Bank with 1* 100W Built-in Cable

Mô tả

• Input specifications: USB-C1 cable: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/4A, 80W Max
• USB-C2:5V/3A 9V/3A 12V/2.5A 30W Max
• Output Specifications: USB-C1 Cable: 10V/2.25A, 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 100W Max (PPS: 5-21V/5A)
• USB-C2 : 10V/2.25A 5V/3A 9V/3A 12V/2.5A 15V/2A 20V/1.5A 30W Max (PPS: 5-11V/3A)
• USB-A: 10V/2.25A 5V/3A 9V/2A 12V/1.5A 5.5-11V/3A 33W Max
• Dual output: C1 cable + C2 port: PD100W + PD30W; C1 cable + A port: 100W + UFCS33W / SCP22.5W; C2 port + A port: a total of 5V/4A (20W)
• Three outputs: C1 cable + C2 port + A: 100W + 5V/4A (20W)
• Battery capacity: 20,000mAh (4 x 5000mAh)
• Battery energy: 72 Wh (14.4V * 5000mAh)
• Rated capacity 11000mAh (TYP 5V7A)
• Battery type: Lithium-ion battery 21700
• Static power consumption ≤ 300 uA
• Supported protocols: Input: USB-C: PD3.0/PD2.0/QC3.0/FCP/AFC/APPLE 2.4A/SAMSUNG 5V2A/BC1.2
• Output:USB-C1 Cable:UFCS(5-21V/5A)/PD3.0/PD2.0/PPS/QC5.0/QC4.0/QC3.0/QC2.0/FCP/AFC/SCP10V2.25A/APPLE 5V2.4A/Samsung 5V2A/BC1.2;
• USB-C2口:UFCS(5.5-11V/3A)/PD3.0/PD2.0/PPS/QC3.0/QC2.0/FCP/AFC/SCP10V2.25A/APPLE 5V2.4A/Samsung 5V2A/BC1.2;
• USB-A: UFCS(5.5-11V/3A)/SCP10V2.25A/QC3.0/QC2.0/FCP/AFC/APPLE 5V2.4A/Samsung 5V2A/BC1.2
• Output ripple: 10V/5V gear: ≤150mV, 9V/12V/15V/20V gear: ≤200mV
• Conversion efficiency: Charging efficiency: ≥85% (board end), Discharge efficiency: ≥90% (board end)
• Output shutdown current: USB-C port: automatically shuts down when the C port is not plugged in for CCpin communication;
• USB-A Port: When the output voltage of port A is 5V and the current is <80mA ± 30mA, it detects no load. It becomes semi-bright after 60 seconds and shuts down after 180 seconds;
• Output Overcurrent Point Rated Output Current Out *(105%~150%)
• Output voltage range: Rated output voltage Vout ± Vout * 5%
• Overtemperature protection: Refer to the list below.
• Indicator light White LED Digital display
• Shell temperature ≤ 65℃ (environmental temperature 30℃)
• Shell material/fire rating: PC+ABS, V-0 flame-retardant rating
• Working environment temperature: 5°C to 35°C (no condensation or ice)
• Storage environment temperature: 0°C to 40°C (no condensation or ice)
• Filling time: approximately 1.6 hours (using a PD80W or higher charger)
• Full-charge storage time: Estimated 2-3 years (not recommended for long-term storage; please charge and discharge every 3 months)
• Charging and Discharging: Supports charging and discharging, with the following power conditions:
• 1. Charging via C1 port, discharging at normal power from C2/A1 port; power reduction occurs when C1 triggers charging temperature conditions;
• 2. The C2 port charges at 30W, while the C1 port discharges at 65W; when the C1 triggers the power supply temperature, the power is reduced to 45W;
• 3. C2 port charges at 15W, A1 port discharges at 15W; no power reduction control is required;
• 4. When discharged to 0%, it automatically recovers output upon charging to 15%, and can recover output by plugging in or out of 1%-15%.
• Discharge output capacity: Discharge output capacity ≥ 11000mAh (5V/7A output); Discharge output capacity ≥ 6500mAh (9V/6A output)
• Discharge output capacity ≥ 5900mAh (10V/4.5A output); discharge output capacity ≥ 4900mAh (12V/5.5A output)
• Discharge output capacity ≥ 3900mAh (15V/5A output); discharge output capacity ≥ 2850mAh (20V/6.5A output)
• Number of interface pins: USB-C: 16PIN, USB-A: 4PIN
• Battery life cycle count: Standard: 500 cycles with at least 80% remaining capacity
• Product dimensions: L54XW51XH131(mm)
• Wiring Information: 1x CC cable, 3A, 60W, 0.2 meters, USB 2.0 standard
• Other ◆USB-C1 cables and USB-C2 ports cannot be charged simultaneously; prioritize plugging in the same USB-C1 cable for input.
• ◆The cells are connected in series.
• ◆Non-through type