UGREEN 2-in-1 Universal PD Fast Charging Cable 140W Max 2m

Mô tả

• Line length: 1.5-2 meters
• gauge
• 30 AWG (19/0.06TS + 250D Nylon) data cable * 2C (white/green) + 30 AWG (19/0.06TS + 250D Nylon) CC cable * 1C (blue) + 23 AWG (52/0.08TS + 250D Nylon) power cable * 3C (pink/pink)
• Red/Black) + F(1000D Nylon) * 4 strands + AL + B (16/10/0.08TC) Outer layer wrapped in black woven mesh
• Diameter OD: 3.8±0.1mm before weaving / 4.4±0.15mm after weaving
• Outer layer of the wire is made of high molecular material.
• Core material: tin-plated copper
• Shielded aluminum foil + tin-plated copper braided
• Number of cores: 6
• Carrying current 5A (MAX)
• pin count: USB-C: 12 pins
• Plug with USB-C/M black rubber core (94V-0) terminal gold-plated 3U” stainless steel casing nickel-plated 10nF capacitor, single-port built-in 1KΩ pull-down resistor
• Two-port connection device type: Single-port connection to the main device and dual-port connection to slave devices during data transfer; note that only one port can be connected at a time. For charging, single-port connection to the charger and dual-port connection to the charging device.
• Chip models: MP2491C + IP2752 + IP2738U + SGM7227
• Plug-and-play times: USB-C: 10,000 times
• Swing Test: Type-C connector 3000 times: swing angle ±90°, lifting weight 300g, 30 times/minute nWire mid-range 3000 times: swing angle ±60°, lifting weight 300g, 30 times/minute
• Resistor: Single on-wire DC resistor: Data cable ≈ 0.32Ω/m² / Power cable ≈ 0.067Ω/m²
• Capacitor parameters: 10 nF*3
• Interface version/data transfer: USB2. *Line length: 1 meter
• Gauge:
• Black/Gray Nebula Model: 30 AWG (19/0.06TS + 250D Nylon) Signal Cable * 2C (White/Green) + 30 AWG (10/0.08ECS + 250D Nylon) CC Cable * 2 (Red/
• Blue) +23 AWG (50/0.08ECS + 500D Nylon) power cord * 4C (red/book/red/book)
• Purple/blue/pink/white models: 30 AWG (19/0.06TS + 250D Nylon) signal cable * 2C (white/green) + 30 AWG (10/0.08ECS + 250D Nylon) CC cable * 2 (red/
• Blue) +24 AWG (43/0.08ECS + 500D Nylon) power cord * 4C (red/book/red/book)
• Diameter OD: Black/Nebula Gray Model: 1.5*6.3±0.1mm White/Violet/Blue/Pink Model: (1.5+0.1/-0)* (6.5+0.2/-0)
• The wire is externally coated with SEBS.
• Core material: tin-plated copper + enamel-coated copper
• Block /
• Number of cores: 8
• Carrying current 5A (MAX)
• pin count: USB-C : 14 pins
• Plug with USB-C/M black rubber core (94V-0), gold-plated pin 3U”, 10nF capacitor, nickel-plated stainless steel casing, one end with (E-Marker chip: HUSB332D). White/pink/blue/purple versions are available.
• Chip model HUSB332D
• USB-C plug-and-play times: 10,000 times
• Swing test: 5000 times, 30 times/min, swing angle ±90°C, lifting weight 300g
• Resistance parameters: Black/nebula Gray model: Data cable ≈ 0.33Ω/m米, Power cable ≈ 0.07Ω/m米 White/Purple/Blue/Pink model: ≈0.33Ω/m,, Power cable ≈ 0.081Ω/m米
• Capacitor parameters: 10 nF*
• Interface version/data transfer USB 2.0/480 Mbps
• Resolution: /
• Charging power: 5V/3A, 9V/2A, 9V/3A, 15V/2A, 15V/3A, 20V/3A, 20V/5A (Max)
• Charging protocol: PD/PPS
• Flame-retardant grade: GB/T 5169.23-2024
• Working temperature/storage temperature: 0~45°C / -15~70°C 18 resolution /
• charging power
• Type-C to Single Type-C: 5/3A, 9V/2A, 9V/3A, 15V/2A, 15V/3A, 20V/3A, 20V/5A, 28V/5A (MAX)
• Output when connected simultaneously
• Power (P) Allocation
• EPR stands for Support
• PD3.1 Fast Charging Protocol
• The equipment
• P ≥ 90W:
• With EPR equipment:
• EPR Equipment: P-30W
• Non-EPR equipment: 30W
• Two circuits are plugged in simultaneously, with non-EPR devices receiving 30W (5V ⎓ 3A / 9V ⎓ 3A / 12V ⎓ 2.5A / 15V ⎓ 2A), and the remaining power allocated to the EPR equipment.
• Without EPR equipment:
• 20V Equipment: P-30W
• Non-20V equipment: 30W
• Two outlets are plugged in simultaneously, with 30W allocated ⎓ non-20V (5V 3A / 9V ⎓ 3A / 12V ⎓ 2.5A / 15V ⎓ 2A), and the remaining power allocated to 20V equipment.
• 20V equipment: P/2 W
• 20V equipment: P/2 W
• Two 20V devices with power evenly distributed between them are plugged in simultaneously.
• Non-20V equipment: P/2 W
• Non-20V equipment: P/2 W
• Two lines plugged in, with power evenly distributed between two non-20V devices
• 36≤P<90W : No EPR equipment
• 20V Equipment: P-18W
• Non-20V equipment: 18W
• Two circuits are plugged in simultaneously, with 18W ⎓ non-20V distribution (5V ⎓ 3A and 9V ⎓ 2A), and the remaining power allocated to 20V equipment.
• 20V equipment: P/2 W
• 20V equipment: P/2 W
• Two 20V devices with power evenly distributed between them are plugged in simultaneously.
• Non-20V equipment: P/2 W
• Non-20V equipment: P/2 W
• Two lines plugged in, with power evenly distributed between two non-20V devices
• Any device
• Equipment 1: P/2 W
• Equipment 2: P/2 W
• Two circuits plugged in, with power evenly distributed between the two devices
• Charging protocol PD3.1/3.0/2.0/PPS (only supports PD protocol when charging simultaneously via dual ports, not PPS)
• Flame Retardant Grade GB/T 5169.23-2024
• Operating temperature/storage temperature: 0~45°C / -15~70°C